Filler Metals

MONEL Filler Metal 60 AWS A5.14 ERNiCu-7

MONEL Filler Metal 60

 

MONEL Filler Metal 60 is used for gas-tungstan-arc, gas-metal-arc, and submerged-arc welding of MONEL alloys 400, R404, and K-500. It is also used for surfacing of steel by the gas-metal-arc or submerged-arc processes. For certain gas-metal-arc conditions, a barrier layer of Nickel Filler Metal 61 is recommended. Submerged-arc welding with MONEL Filler Metal is done with INCOFLUX 5 submerged Arc Flux.

 

Weld metal deposited by MONEL Filler Metal 60 has properties similar to those of MONEL alloy 400. It has god strength and resist corrosion in many media, including sea water, salts, and reducing acids. The weld metal is not age hardenable and when used to join MONEL alloy K-500 has lower strength than base metal.

 

Specifications

AWS A5.14 ERNiCu-7 (UNS N04060)

ASME II, Part C, SFA-5.14, ERNiCu-7 (UNS N04060)

ASME IX, F-No.42

*BS 2901 (NA33)

*DIN 1736 SG-NiCu30MnTi (2.4377)

*(EN) ISO 18274 - SNi4060 (NiCu30Mn3Ti)

*Supply to these specifications available upon request

For manufacture to ASME III (NCA3800, NB2400), MIL, and other specifications please refer your inquiry to the Technical Department prior to order placement. 

 

Approvals

VdTUV 2114.01; 2165.01

Other approvals may be applicavle. Please confirm details of current scope of approvals with the Technical Department prior to order placement.

 

Limiting Chemical Composition	Ni+Co..........................62.0-69.0 C..................................0.15 max. Mn.................................4.0 max. Fe..................................2.5 max. S................................0.015 max. Si.................................1.25 max.	Cu..........................Remainder. Al.............................1.25 max. Ti.................................1.5-3.0 P............................0.020 max. Others......................0.50 max.
Minimum Mechanical Properties	Tensile Strength, psi MPa Elongation, (4d) %	70,000 483 30

 

Filler metals available on spool and in cut straight lengths in a variety of sizes selected from the following diameters.

 

Available Product Forms 

mm in

0.8 0.030

0.9 0.035

1.0 0.040

1.14 0.045

1.2 0.047

1.6 0.062

2.4 0.093

3.2 0.125

Straight Lenths - 915 mm (36 in.) or 1000 mm (39 in.)