Filler Metals

BrazeTec 5600 BrazeTec 5600

Technical Data Sheet

BrazeTec 5600

 

TD BT 0003 E.02

 

 

Standard

AG 102 acc. DIN EN 1044 (L-Ag55Sn acc. DIN 8513)

B-Ag56CuZnSn 620/655 acc. ISO 3677

 

Nominal composition in wt.-%                         Ag 56; Cu 22; Zn 17; Sn 5

Permited impurities (weight-%):

AI 0,001; Bi 0,030; Cd 0,030; P 0,008; Pb 0,025; Si 0,05; Total impurities 0,15

 

Technical data                             

Melting range                                                      app. 620-655°C           (DIN EN 1044)

Working temperature                                           app. 650°C                 (DIN EN 1044)

Density                                                               app. 9,5 g/cm3            (DIN EN 1044)

Tensile strength acc. DIN 8525                              with St 37: 350 MPa; with St 50: 430 MPa

Elongation                                                           app. 25 %

Eletrical Conductivity                                             app. 7,0 m/Ωmm2

Operating temperature of brazed joint                    max. 200°C (without loss in strentg)

 

 

Standard delivery form*

Wire:         1,0 - 1,5 - 2,0 mm Ø

Rods:        1,0 - 1,5 - 2,0 mm Ø, 500 mm length

Ribbon: 0,1/ 0,2/ 0,3/ 0,4 mm thickness and 70 mm width

Preforms: rings, shaped parts, sections, stemped parts, lamina, discs, perforated plates

*Other delivery forms on request

 

Application

BrazeTec 5600 is a low melting silver based brazing alloy with excellent flow characteristics. It can be used for brazing any steels, copper and copper based alloys as well as for nickel and nickel based alloys.

It can be used for brazing with flame or induction brazing procedures.

Typical applications are found e.g. in the automotive and in the eletric industy.