Arc Welding Service

CATEGORY

TYPE

SAW stainless steel austenitic filler metal with excelent corrosion resistance

APPLICATIONS

Tanks and process vessels, Piping systems, agitators, rotors, cast pumps and valves for use in the fertilizer, phosphoric,sulphuric and acetic acid plants

PROPERTIES

SA 904L is used for welding materials of similar chemical composition which are used for fabrication of equipment and vessels for handling of sulfuric acid and many chloride containing media. This filler metal may also find applications for joining Type 317L material where improved corrosion resistance in specific media is needed. In order to reduce the propensity for fissuring and hot cracking, the low melting constituents such as carbon, silicon, and phosphorus are controlled to lower levels in this alloy. Best to be used with our fused flux FL 880

CLASSIFICATION

AWS

A 5.9: ER 385

EN ISO

14343-A: S 20 25 5 Cu L

14343-B: SS385

DIN: W.Nr.

1.4539

DIN

8556: ~20 25 5 L Cu

SUITABLE FOR

W.Nrs: 1.4500, 1.4505, 1.4506, 1.4531, 1.4536, 1.4539, 1.4573, 1.4585, 1.4586, 4 NS N 08904 1.4539, 1.4537, 1.4519, 1.4505, UNS N08904, S31726, X1NiCrMoCu 25-20-5, X1CrNiMoCuN 25-25-5, X4NiCrMoCuNb 20-18-2, Uranus B6

APPROVALS

CE approved

WELDING POSITIONS:

WELD DEPOSIT WEIGHT (TYPICAL) %

C	Mn	Si	Cr	Ni	Mo	N	Cu	P	S
0.019	2.05	0.35	20.5	25.1	4.6	0.04	1.6	0.014	0.015

TYPICAL WELD METAL PROPERTIES

Heat	R_P0,2	Rm	A5	Impact Energy (J) ISO-V			Hardness
Treatment	(N/mm²)	(N/mm²)	(%)	+20°C	-40°C	-60°C	HRc / HV
AW	>380	>560	>35	>70

AW: as welded

REDRYING TEMPERATURE

Not required

WELDING PARAMETERS / PACKING

Welding Parameters			Packing
D (mm)	Voltage (V)	Current (A) DC+	spool type	kg / spool	kg / pallet
1.6	28-30	180-250	K-415	25
2.0	29-31	200-300	K-415	25
2.4	29-32	220-380	K-415	25