Arc Welding Service

CATEGORY

TYPE

High-alloyed fluxcored wire on a C-Cr-Mo Carbide basis for extreme wear resistant deposits on Parts subject to strong mineral abrasion.

APPLICATIONS

Rebuilding and or protecting parts that faces extreme abrasion with medium impact.

PROPERTIES

High wear resistance and austenitic structure deposits. The deposit gives already a very good hardness in the first layer. A buffer layer with OA 4370 or OA MnCr is recommended in case of sensible base
material or old hardface-layers. Weldable without protective gas.

CLASSIFICATION

AWS

A 5.21:

EN ISO

14700: T Fe14

DIN

8555: MF 10-60-CGT

SUITABLE FOR

Cement industry, pumps, mixer blades, earthmoving equipment, dredging equipment and parts, wear plates, crushing equipment, blast furnace parts etc...

APPROVALS

CE approved

WELDING POSITIONS:

WELD METAL ANALYSIS %

C	Mn	Si	Cr	Mo
3.7	0.20	0.9-1.2	28-33	0.6

MECHANICAL PROPERTIES

Delution	R_P0,2	Rm	A5	Impact Energy (J) ISO-V			Hardness
results	(N/mm²)	(N/mm²)	(%)	-20°C	-40°C	-60°C	HRc
First layer on mild steel							48-55
Third layer on mild steel							58-60

REDRYING TEMPERATURE

150°C / 24hr

WELDING PARAMETERS / PACKING

Welding Parameters			Packing
D (mm)	Voltge (V)	Current (A)	spool type	kg / spool
1.6	22-35	160-340	S-300 / Coil B-450 / Drum	15 / 25 / 300
2.0	24-35	180-400	S-300 / Coil B-450 / Drum	15 / 25 / 300
2.4	26-35	240-460	S-300 / Coil B-450 / Drum	15 / 25 / 300
2.8	28-35	250-450	S-300 / Coil B-450 / Drum	15 / 25 / 300

OA 60 Mo